ZyAIR G-4100 User's Guide
If you are upgrading to firmware version v1.00(ZB.3)c0 or
higher from a lower version, you might upgrade the boot code to
v1.03 as well. In this case, you must upgrade the firmware BEFORE
you upgrade the boot code.
23.3.1 Manual Firmware Upgrade Using the Web Configurator
Follow the steps below to upload the firmware using the web configurator.
Click SYSTEM TOOLS, FIRMWARE and then Manual Firmware Upgrade to display the
5.
screen as shown.
Figure 23-8 Manual Firmware Upgrade Using the Web Configurator
Specify the name of the firmware file in the Local PC File Path field or click Browse to locate the
6.
file and click Apply to start the file transfer process. The firmware must be a binary file and
should have a .bin extension.
When the file transfer is completed successfully, a restart message displays and the ZyAIR
7.
automatically restarts.
WARNING!
Do not interrupt the file upload process as this may
PERMANENTLY damage the device.
23-6
Configuration, Firmware and Accounting Log Maintenance