Manual Firmware Upgrade Using The Web Configurator; Figure 104 System Tools > Firmware > Manual Firmware Upgrade: Using The Web Configurator; Figure 105 System Restart - ZyXEL Communications G-4100 V2 User Manual

G-4100 v2 User's Guide

27.3.1 Manual Firmware Upgrade Using the Web Configurator

Follow the steps below to upload the firmware using the web configurator.
1 Click SYSTEM TOOLS > FIRMWARE > Manual Firmware Upgrade to display the
screen as shown.
Figure 104 SYSTEM TOOLS > FIRMWARE > Manual Firmware Upgrade: Using the Web
Configurator
2 Specify the name of the firmware file in the Local PC File Path field or click Browse to
locate the file and click Apply to start the file transfer process. The firmware must be a
binary file and should have a .bin extension.
3 When the file transfer is completed successfully, a restart message displays and the
ZyXEL Device automatically restarts.
Note: WARNING!
Do not interrupt the file upload process as this may PERMANENTLY damage
the device.

Figure 105 System Restart

4 After the ZyXEL Device finishes restarting, access the web configurator again. Check the
firmware version number in the System screen.
Note: When the ZyXEL Device restarts, all connections terminate. Subscribers need
to log in again.
206 Chapter 27 Configuration, Firmware and Accounting Log Maintenance