Table of Contents
Advertisement
Chapter 5 WAN Setup
Table 23 WAN Configuration: NAT, IGMP Multicast and Firewall Activation: IPoE
LABEL
Back
Next
5.5.1.5 Default Gateway
The screen is not available when you select Bridging in the WAN Service Configuration screen.
Figure 28 WAN Configuration: Default Gateway: PPPoE, PPPoA, IPoE or IPoA
The following table describes the labels in this screen.
Table 24 WAN Configuration: Default Gateway: PPPoE or IPoE
LABEL
Selected Default
Gateway Interfaces
Available Routed
WAN Interfaces
Selected WAN
Interface
Back
Next
5.5.1.6 DNS Server
The screen is not available when you select Bridging in the WAN Service Configuration screen.
10
2
DESCRIPTION
Click this button to return to the previous screen.
Click this button to continue.
DESCRIPTION
Select a WAN interface through which you want to forward the traffic.
You can select multiple WAN interfaces for the device to try. The Device tries
the WAN interfaces in the order listed and uses only the default gateway of the
first WAN interface that connects; there is no backup WAN function. To change
the priority order remove them all and add them back in again.
These are the WAN interfaces you can select from.
Select a WAN interface through which to forward IPv6 traffic.
Click this button to return to the previous screen.
Click this button to continue.
P-870HNU-51b User's Guide
Advertisement
Table of Contents
Troubleshooting
