The Wds Screen - ZyXEL Communications AMG1302-T11C User Manual

Table 24 Network Setting > Wireless > WPS
LABEL
AP PIN
Status
Release
Configuration
802.11 Mode
SSID
Security
Pre-Shared Key
Apply
Cancel

7.6 The WDS Screen

An AP using the Wireless Distribution System (WDS) can function as a wireless network bridge
allowing you to wirelessly connect wired network segments. The WDS screen allows you to
configure the AMG1302-T11C to connect to other APs wirelessly when WDS is enabled.
Use this screen to set up your WDS (Wireless Distribution System) links between the AMG1302-
T11C and other wireless APs. You need to know the MAC address of the peer device. Once the
security settings of peer sides match one another, the connection between devices is made.
Note: WDS security is independent of the security settings between the AMG1302-T11C
and any wireless clients.
Note: At the time of writing, WDS is compatible with other ZyXEL APs only. Not all models
support WDS links. Check your other AP's documentation.
Click Network Setting > Wireless > WDS. The following screen displays.
Chapter 7 Wireless LAN
DESCRIPTION
The PIN (Personal Identification Number) of the AMG1302-T11C is shown here. Enter this
PIN in the configuration utility of the device you want to connect to using WPS.
The PIN is not necessary when you use WPS push-button method.
Click the Generate New PIN button to have the AMG1302-T11C create a new PIN.
This displays Configured when the AMG1302-T11C has connected to a wireless network
using WPS or Enable WPS is selected and wireless or wireless security settings have
been changed. The current wireless and wireless security settings also appear in the
screen.
This displays Unconfigured if WPS is disabled and there is no wireless or wireless
security changes on the AMG1302-T11C or you click Release to remove the configured
wireless and wireless security settings.
The default WPS status is Unconfigured.
When the WPS status is Configured, click this button to remove all configured wireless
and wireless security settings for WPS connections on the AMG1302-T11C.
This field displays the AMG1302-T11C's wireless mode that only allows the compliant
WLAN devices to associate with it.
This field displays the SSID the AMG1302-T11C is currently using.
This field displays the security mode the AMG1302-T11C is currently using.
This field displays the pre-shared key the AMG1302-T11C uses when the security mode
is set to WPA(2)-PSK.
Click this to save your changes.
Click this to restore your previously saved settings.
AMG1302-T11C User's Guide
100