The Wds Screen - ZyXEL Communications P-660HN-51 User Manual

802.11n wireless adsl2+ 4-port gateway
Hide thumbs Also See for P-660HN-51:
Table of Contents

Advertisement

Figure 25 Network Settings > Wireless > WMM
The following table describes the labels in this screen.
Table 17 Network Settings > Wireless > WMM
LABEL
WMM
WMM Power Save Select this option to extend the battery life of your mobile devices (especially useful
Apply
Cancel

6.7 The WDS Screen

An AP using the Wireless Distribution System (WDS) can function as a wireless network bridge allowing
you to wirelessly connect two wired network segments. The WDS screen allows you to configure the Zyxel
Device to connect to two or more APs wirelessly when WDS is enabled.
Use this screen to set up your WDS (Wireless Distribution System) links between the Zyxel Device and other
wireless APs. You need to know the MAC address of the peer device. Once the security settings of peer
sides match one another, the connection between devices is made.
Note: WDS security is independent of the security settings between the Zyxel Device and any
wireless clients.
Note: At the time of writing, WDS is compatible with other Zyxel APs only. Not all models
support WDS links. Check your other AP's documentation.
Click Network Settings > Wireless > WDS. The following screen displays.
Chapter 6 Wireless
DESCRIPTION
Select On to have the Zyxel Device automatically give a service a priority level
according to the ToS value in the IP header of packets it sends. WMM QoS (Wifi
MultiMedia Quality of Service) gives high priority to voice and video, which makes
them run more smoothly.
for small devices that are running multimedia applications). The Zyxel Device goes to
sleep mode to save power when it is not transmitting data. The AP buffers the
packets sent to the Zyxel Device until the Zyxel Device "wakes up". The Zyxel Device
wakes up periodically to check for incoming data.
Note: Note: This works only if the wireless device to which the Zyxel Device is
connected also supports this feature.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
P-660HN-51 User's Guide
73

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents