Table of Contents
Advertisement
LABEL
System Name
It is recommended you type your computer's "Computer name". some ISPs check this name
you should enter your computer's "Computer Name".
In Windows 95/98 click Start, Settings, Control Panel, Network. Click the Identification
tab, note the entry for the Computer Name field and enter it as the System Name.
In Windows 2000, click Start, Settings, Control Panel and then double-click System.
Click the Network Identification tab and then the Properties button. Note the entry for
the Computer name field and enter it as the System Name.
In Windows XP, click Start, My Computer, View system information and then click the
Computer Name tab. Note the entry in the Full computer name field and enter it as the
ZyAIR System Name.
This name can be up to 30 alphanumeric characters long. Spaces are not allowed, but
dashes "-" and underscores "_" are accepted.
Domain Name The Domain Name entry is what is propagated to the DHCP clients on the LAN. Type the
domain name (if you know it) here. If you leave this field blank, the ISP may assign a domain
name via DHCP. The domain name entered by you is given priority over the ISP assigned
domain name.
Next
Click Next to proceed to the next screen.
3.3
Wizard Setup: Wireless LAN Setup
Set up your wireless LAN using the second wizard screen.
Wizard Setup
Table 3-1 Wizard 1: General Setup
DESCRIPTION
ZyAIR Wireless Gateway Series User's Guide
3-3
Advertisement
Chapters
Table of Contents
