Nsa Login And Access - ZyXEL Communications NSA-2401 User Manual

• Make sure the Ethernet cable is connected properly to the NSA and connected to another
(Ethernet) device. Make sure the other device is turned on. If it's connected directly to a
computer, make sure that the computer network card is working (ping 127.0.0.1 on the
computer).
• Use another Ethernet cable. If you're connecting to a Gigabit Ethernet, make sure you're
using an 8-wire Ethernet cable.
• If the problem continues, contact the vendor.
See Section 1.1.1 on page 32
I hear a buzzer sound coming from the NSA.
• By default when the NSA generates an emergency log, it also sounds an audible alarm to
warn you.
• Log into the Web Configurator. You will be presented with a screen that displays the log
and lets you disable the buzzer.

12.3 NSA Login and Access

I forgot the IP address for the NSA.
• 192.168.1.3 is the default LAN1 IP address and 192.168.100.1 is the default LAN2 IP
address.
• Use the NDU (NSA Discovery Utility) to discover your NSA. If you have admin
privileges, you can directly change the IP address of the NSA using the NDU.
• If you changed the default password and you don't have the NDU, use the RESET button
at the front of the NSA. Refer to
reset button.
I forgot the password.
• The default password is 1234.
• You may have to reset the NSA password or configuration - see
detailed information on the reset button.
The NDU cannot discover my NSA.
NSA-2401 User's Guide
for a description of NSA LEDs.
Section 2.7 on page 52
Chapter 12 Troubleshooting
for detailed information on the
Section 2.7 on page 52 for
249