Zyxel Device Access And Login - ZyXEL Communications PM7516 Series User Manual

12.2 Zyxel Device Access and Login

I forgot the IP address for the Zyxel Device.
The default LAN IP address is https://192.168.0.1.
1
I forgot the password.
See the cover page and device label for the default login name and associated password.
1
If those do not work, you have to reset the device to its factory defaults. See
2
I cannot see or access the Login screen in the Web Configurator.
Make sure you are using the correct IP address.
1
• The default IP address is https://192.168.0.1.
• Manually configure your computer's IP address to 192.168.0.X (X represents any number from 2 to
254. For example, 192.168.0.25. Then set the subnet mask as 255.255.255.0.
• If you changed the IP address
• If you changed the IP address and have forgotten it, see the troubleshooting suggestions for
forgot the IP address for the Zyxel Device.
Check the hardware connections, and make sure the LEDs are behaving as expected. See
2
on page 9.
Make sure your Internet browser does not block pop-up windows and has JavaScripts and Java
3
enabled.
Reset the device to its factory defaults and try to access the Zyxel Device with the default IP address.
4
See Section 1.4.4 on page
If the problem continues, contact the network administrator or vendor.
5
I can see the Login screen, but I cannot log into the Zyxel Device.
Make sure you have entered the password correctly. See the cover page and device label for the
1
default login name and associated password. The field is case-sensitive, so make sure [Caps Lock] is not
on.
Chapter 12 Troubleshooting
(Section 4.2 on page
11.
PM7510-R0 User's Guide
34
Section 1.4.4 on page
19), use the new IP address.
11.
I
Section 1.4.1