Using A Disk Array's Increased Capacity; Figure 110 Storage > Internal Storage > Raid > Add Disk; Figure 111 Storage > Internal Storage > Disk - ZyXEL Communications NSA-2401 User Manual

4 Select RAID5 Reshape and click Apply.
Figure 110 Storage > Internal Storage > RAID > Add Disk
5 After the NSA finishes adding the disk to the array, click the Disk tab. The new disk
displays the same Type and RAID Array as the other disks in the array.
Figure 111 Storage > Internal Storage > Disk
You have completed adding the hard drive to the RAID array. Continue to
page 109 for how to use the increased storage capacity.

3.9.3 Using a Disk Array's Increased Capacity

After you increase an array's storage capacity, use the following procedure to make the NSA's
existing volumes larger in order to use the increased capacity. You do not have to change your
existing share, backup, and snapshot settings. Of course you can also create new volumes, but
you must configure new share settings in order to use them and new backup and snapshot
settings to protect the files.
NSA-2401 User's Guide
Chapter 3 Tutorials
Section 3.9.3 on
109