Chapter 6 Storage Screens
6.6.2 USB Key Creation
When you create a volume encrypted by a USB key, click the Create USB Drive button to
open a series of screens for creating a volume encryption password and storing it on a
connected USB device.
6.6.2.1 Selecting the USB Device
When you click the Create USB Drive button a screen displays. Select the USB device on
which to create the USB key and click Next. Click a column's heading cell to sort the table
entries by that column's criteria. Click the heading cell again to reverse the sort order.
Figure 132 Selecting the USB Device
The following table describes this screen.
Table 31 Selecting the USB Device
LABEL
Name
Type
Model Name
Capacity
Next
Cancel
6.6.2.2 Creating a Duplicate USB Key (Strongly Recommended)
Use these screens to create extra copies of your USB key in case one is lost, damaged, or
stolen. Without a USB key, you cannot access the volume if it becomes locked. All of the
volume's data will be unusable.
1 Select Yes to copy the USB key to another USB device. After the duplicate USB key
creation completes, you return to this screen so you can make another. Click No when
you are done making USB key copies.
144
DESCRIPTION
This field shows USB1, USB2, and so on for disks connected to the
NSA's USB ports.
This shows whether or not the device has an encrypted volume.
This is the device's model name that uniquely identifies it in the NSA.
This field shows the device's storage size.
Click this button to proceed.
Click this button to discard your changes and close this screen.
NSA-2401 User's Guide