Chapter 3 Tutorials
9 The RAID's status displays as Recovering.
Figure 120 Storage > Internal Storage > RAID
After the recovery finishes and the status shows up as Healthy, reboot the NSA. Then you can
use the same process to migrate any (or all) of the RAID's drive as long as you replace them
one-by-one and recover the RAID after each replacement. When you are done replacing hard
drives and the final RAID recovery finishes, you can assign the increased storage capacity to
your existing volumes (see
Section 3.9.3 on page
109) .
113
NSA-2401 User's Guide