Power Management; Figure 204 Maintenance > Fw Upgrade; Table 105 Maintenance > Fw Upgrade - ZyXEL Communications NSA-2401 User Manual

Chapter 11 Maintenance Screens
The SYS LED blinks orange when firmware is being uploaded to the NSA. Do
not turn off or reset the NSA while the firmware update is in progress!
Figure 204 Maintenance > FW Upgrade
The following table describes the labels in this screen.
Table 105 Maintenance > FW Upgrade
LABEL
Firmware File
Browse
Upload
Reset

11.6 Power Management

Click Maintenance > Power Management to open this screen, where you can set the NSA's
power management settings.
240
DESCRIPTION
Enter the location of the firmware file you want to upload.
Click this open a Browse dialog box to find the file on your computer if
you don't want to manually enter the location.
Click this to upload the new firmware.
The NSA automatically restarts after you upgrade. Wait until the restart
completes before accessing the NSA again. If you interrupt the upgrade,
then the NSA may become unusable.
Click this to begin configuring this screen afresh.
NSA-2401 User's Guide