Creating A New Raid; Figure 129 Storage > Internal Storage > Raid > Create; Table 26 Storage > Internal Storage > Raid - ZyXEL Communications NSA-2401 User Manual

Chapter 6 Storage Screens
Table 25 Storage > Internal Storage > RAID Icons (continued)
ICON
The following table describes the labels in this screen.
Table 26 Storage > Internal Storage > RAID
LABEL
Label
RAID Level
Capacity
Disk
Hot Spare

6.5.1 Creating a New RAID

Click the Create icon in the RAID screen as shown in
RAID array.
Figure 129 Storage > Internal Storage > RAID > Create
138
DESCRIPTION
Sort
Click a column's heading cell to sort the table entries by that column's
criteria. Click the heading cell again to reverse the sort order.
Status
This icon shows Healthy, Resynching, Degraded or Down; see
6.4.2 on page 134. If an array is degraded, click the Repair icon after you
have replaced the faulty disk.
DESCRIPTION
This field shows the name of the array.
This field shows which type of data storage system (a RAID level or
JBOD) the array is using. See
different levels.
This field shows the total size of the array, how much is currently in use,
and how much is still available.
This field shows the hard disks that are in the array.
If the array has a standby disk, this field identifies it.
Section 6.4 on page 132 for details on the
Figure 128 on page 135 to create a new
NSA-2401 User's Guide
Section