Shutdown; Table 107 Maintenance > Power Management > Edit - ZyXEL Communications NSA-2401 User Manual

The following table describes the labels in this screen.
Table 107 Maintenance > Power Management > Edit
LABEL
Power Control Schedule
List
Type
Frequency
Execute Time
Add Power Control
Schedule
Type
Frequency
Execute Time
Add
Apply
Cancel

11.7 Shutdown

Click Maintenance > Shutdown to open the shutdown screen. Use this screen to turn off the
NSA or restart it. Before shutting down or restarting, check the System Status screen to make
sure that no one is logged into the NSA or transferring files to or from it.
NSA-2401 User's Guide
DESCRIPTION
This table lists the power on, power off, and reboot schedules. For
example, you could have one schedule to turn the NSA on every morning,
at 8:00, another schedule to turn it off every evening at 18:00, and a third
schedule to have it reboot every Friday at 14:00. Click a column's heading
cell to sort the schedules by that column's criteria. Click the heading cell
again to reverse the sort order.
This field displays whether the power control schedule has the NSA turn
on, turn off, or reboot.
This field shows how often (monthly, weekly, or daily) the NSA is to apply
this power control schedule.
This field shows when the NSA is to use this power control schedule
(when the NSA is to turn on, turn off, or reboot).
Delete
Click this to remove a power control schedule from the list.
Use this part of the screen to configure power on, power off, and reboot
times.
Select whether this power control schedule has the NSA turn on, turn off,
or reboot.
Select whether the NSA is to apply this power control schedule entry on a
monthly, weekly, or daily basis.
Enter the time, day, and/or day of the month as appropriate for this power
control schedule entry. Leave more than 10 minutes between the
execution times of the entries.
If the NSA turns off or restarts while a user is transferring files to or from
the NSA, the transfer fails. The user will need to restart the transfer.
The NSA skips a scheduled restart or power off if the execution time
comes while the NSA is doing any of the following:
• Resynchronizing a RAID
• Upgrading firmware
• Replacing the configuration file
The NSA delays a scheduled restart or power off until it finishes any of the
following:
• Backing up files
• Restoring files from a backup
• Taking a snapshot
If the NSA is turned off at the time when a restart or power off is
scheduled, the NSA does not perform the restart or power off.
If the NSA is turned on at the time when a power on is scheduled, the
NSA does not perform the power on.
Click this to add the power control schedule to the list.
Click this to save your changes.
Click this to discard changes and close the window.
Chapter 11 Maintenance Screens
243