Configuring The Tcp/Ip Screen; Figure 143 Jumbo Frames - ZyXEL Communications NSA-2401 User Manual

Chapter 7 Network Screens
If you enable jumbo frames on the NSA in a network that does not support
them, you will lose access to the NSA. If this occurs, you will have to restore
the factory default configuration. Use the RESET button or the Web
Configurator.
In the following example, the NSA has jumbo frames enabled and set to 9KB frames. This
means the computer, notebook computer, and switch must also have jumbo frames enabled
and be capable of supporting 9KB frames.

Figure 143 Jumbo Frames

7.2.1 Configuring the TCP/IP Screen

Use the Network > TCP/IP screen to assign the NSA a dynamic or static IP address(es),
subnet mask, default gateway and DNS servers.
The NSA automatically restarts its network services after you apply changes in
the TCP/IP or Windows/CIFS screens.
Click Network > TCP/IP to access the Network > TCP/IP screen.
162
1 Gbps Ethernet
9KB
9KB
9KB
9KB
NSA-2401 User's Guide