Creating Or Editing An Internal Volume; Figure 131 Storage > Internal Storage > Volume > Create; Table 30 Storage > Internal Storage > Volume Create - ZyXEL Communications NSA-2401 User Manual

Chapter 6 Storage Screens

6.6.1 Creating or Editing an Internal Volume

Click Storage > Internal Storage > Volume > Create to display the internal volume creation
screen as shown next. You can also select an existing internal volume and click the Edit icon.
Use this screen to add or edit internal storage volumes.
Keep an encrypted volume's password or USB key in a safe place. Without the
password or USB key, you cannot access the volume if it becomes locked. All
of the volume's data will be unusable.
Figure 131 Storage > Internal Storage > Volume > Create
If you use a USB key, make sure you create backup copies when you create
the USB key. You can only create USB key backup copies when you are
creating the USB key). Do not use the USB key for anything else (do not store
data on it or format it).
The following table describes this screen.
Table 30 Storage > Internal Storage > Volume Create
LABEL
RAID Label
Volume Name
142
DESCRIPTION
Select the disk array upon which you want to create the volume. This
option is only available when you create a volume.
Type a volume name from 1 to 31 characters. To avoid confusion, it is
highly recommended that each volume use a unique name.
Acceptable characters are all alphanumeric characters (A-Z 0-9) and " "
[spaces], "-" [dashes], "_" [underscores], and "." [periods].
The first character must be alphanumeric.
The last character cannot be a space " ".
NSA-2401 User's Guide