The following table describes the labels in this screen.
Table 90 Applications > Print Server > Rename
LABEL
Name
Apply
Reset
10.4 Copy Button
Click Applications > Copy Button to open this screen. Use the COPY button on the front
panel of the NSA to copy files between a USB flash drive or externally connected hard disk
and a share in the NSA. If more than one USB device is connected to the NSA, the NSA uses
the USB device that was most recently connected.
Figure 188 Applications > Copy Button
The following table describes the labels in this screen.
Table 91 Applications > Copy Button
LABEL
Currently Selected Share
Edit
Copy Direction
Apply
Clear Settings
Reset
10.4.1 Changing the Copy Button Share
Click Applications > Copy Button and then Edit to open the following screen. Use this
screen to select the share the NSA uses with the copy button.
NSA-2401 User's Guide
DESCRIPTION
Type a new name to identify the printer. The name must be unique from all
the other names of printers connected to the NSA.
Click this to save your changes.
Click this to discard any changes and start again.
DESCRIPTION
This field displays the share that the NSA is set to use with the copy button
feature.
Click this button to use a different share with the copy button feature.
Select whether you want to use the copy button to copy files from the USB
device to the share on the NSA or from the share on the NSA to the USB
device.
Select a share, then click this to make it the default location where data is
stored when you press the copy button.
Click this to reset this screen to the default settings.
Click this to discard any changes and start again.
Chapter 10 Application Screens
225