ZyXEL Communications NSA-2401 User Manual page 179

Table 51 Sharing > Users > Create a New Account (continued)
LABEL
Group Membership
Available Groups
Group Membership
Apply
Cancel
8.2.1.1 Account Names
Enter an account name from 1 to 14 characters. The first character must be alphabetical (case
insensitive, [A-Z a-z]); numeric characters are not allowed as the first character.
The account name can only contain the following characters:
• Alphanumeric A-z 0-9
• Spaces
• _ [underscores]
• . [periods]
• - [dashes]
Other limitations on account names are:
• All leading and trailing spaces are removed automatically.
• Multiple spaces within names are converted to a single space.
• Account names are case insensitive. The account name cannot be the same (regardless of
the letter case) as an existing local account or domain account. For example, if there exists
a domain account with the name 'BOB', you cannot create a local account named 'bob'. If
you enter an account 'bob' but use 'BOB' when connecting via CIFS or FTP, it will use the
account settings used for 'bob'.
• The account name cannot be the same as a system account name such as FTP or
EVERYONE nor be the same as an existing local or domain account. Other reserved user
names that are not allowed are:
• bin
• daemon
• ftp
• anonymous
• nobody
• root
• pc-guest
NSA-2401 User's Guide
DESCRIPTION
Choose the groups to which you want to assign this account. You can
select multiple groups by holding the [Ctrl] key while you click.
Before a user can be assigned a group, you must first create one or more
on the NSA. A group is a set of users that have common NSA access
rights. A user can belong to more than one group.
More restrictive access rights override less restrictive ones.
These are the groups that have been created on either the NSA or the
domain controller. Select the group(s) that you want the account to join
and then click the Add Selected Group(s) button.
You need to click Apply for the changes to take effect.
These are the groups that the account already belongs to on either the
NSA or domain controller. Select the group(s) that you want the account
to leave and then click the Remove Selected Group(s) button.
You need to click Apply for the changes to take effect.
Click this to save your changes.
Click this to discard changes and close the dialog box.
Chapter 8 Sharing Screens
179