Nsa Reset Button; Reset; Reload Factory Default Configuration File - ZyXEL Communications NSA-2401 User Manual

Chapter 2 Introducing the Web Configurator
Table 15 Common Configuration Screen Icons (continued)
ICON

2.7 NSA RESET Button

Use the RESET button on the front panel of the NSA to reset either just the NSA's admin
password and IP address settings or the whole factory default configuration file. Use an object
such as an unfolded paper clip to press the RESET button.
Ideally you should back up the current NSA configuration file before resetting
or reloading the factory default configuration file.

2.7.1 Reset

Do the following to only reset the administrator password and IP address settings to the
defaults.
Press the RESET button and hold it for two seconds (you will hear one beep) and release it.
The NSA sounds another single beep after you release the button as confirmation.

2.7.2 Reload Factory Default Configuration File

Do the following to reload the factory default configuration file. This resets the admin
password and IP address settings to the default settings AND erases all other configurations
such as user/group/share names, passwords, and share access rights.
Press the RESET button and hold it for ten seconds (you will hear three beeps) and release it.
The NSA sounds three more beeps after you release the button as confirmation.
52
DESCRIPTION
User
This is a user icon. See the chapter on the sharing screens for details on variants of
this icon.
Share
This is a share icon. See the chapter on shares for details on variants of this icon.
NSA-2401 User's Guide