Figure 114 Storage > Internal Storage > Disk; Figure 115 Storage > Internal Storage > Disk > Eject; Figure 116 Storage > Internal Storage > Disk > Eject - ZyXEL Communications NSA-2401 User Manual

1 Click Storage > Internal Storage > Disk to list the installed disks. Select a disk to
replace first (disk 1 in this example) and click Eject.
Figure 114 Storage > Internal Storage > Disk
2 Click Apply.
Figure 115
3 Remove the hard drive. The NSA sounds an audible alarm.
4 Log out of the Web Configurator and then back in. The Log Message screen shows that
the RAID is degraded, click Turn Off Buzzer to stop the audible alarm. Then click OK
to continue.
Figure 116 Storage > Internal Storage > Disk > Eject
NSA-2401 User's Guide
Storage > Internal Storage > Disk > Eject
Chapter 3 Tutorials
111