Clean Up; Site Considerations - Grizzly G0451 Instruction Manual

clean up

the unpainted surfaces are coated with a waxy
oil to prevent corrosion during shipment. remove
this protective coating with a solvent cleaner
or degreaser, such as shown in figure 19. For
thorough cleaning, some parts must be removed.
for optimum performance, clean all moving
parts or sliding contact surfaces. Avoid chlo-
rine-based solvents, such as acetone or brake
parts cleaner that may damage painted surfac-
es. Always follow the manufacturer's instructions
when using any type of cleaning product.
gasoline and petroleum
products have low flash
points and can explode
or cause fire if used to
clean machinery.
nOT use these products
to clean the machinery.
Many cleaning solvents
are
Minimize your risk by only
using these products in a
well ventilated area.
g2544—Solvent cleaner & degreaser
A great product for removing the waxy shipping
grease from your machine during clean up.
figure 19. Cleaner/degreaser available from
grizzly.
-22-
dO
toxic if inhaled.

Site considerations

floor load
the Model g0451 weighs 1309 lbs. and has a
base footprint of 54½" W x 39" d. Most commer-
cial floors are suitable for your machine. some
residential floors may require additional reinforce-
ment to support both the machine and operator.
working clearances
Consider existing and anticipated needs, size of
material to be processed through each machine,
and space for auxiliary stands, work tables or
other machinery when establishing a location for
your saw. see figure 20 for the maximum work-
ing clearances of the Model g0451.
226"
figure 20. Working clearances.
children and visitors may be
seriously injured if unsuper-
vised around this machine.
lock entrances to the shop
or disable start switch or
power connection to prevent
unsupervised use.
g0451 14" sliding table saw