Clean Up - Grizzly G1023S Instruction Manual

Clean Up

The table and other unpainted parts of the Model
G1023 Series are coated with a waxy grease that
protects them from corrosion during shipment.
Clean this grease off with a solvent cleaner or
citrus-based degreaser such as Grizzly's G7895
Degreaser. Do not use chlorine-based solvents
– if you happen to splash some onto a painted
surface, you will ruin the finish.
Do not use gasoline or
other petroleum-based
solvents to clean with.
They have low flash
points which make them
extremely
A risk of explosion and
burning exists if these
p r o d u c t s a r e u s e d .
Serious personal injury
may occur.
Do not smoke while using
solvents. A risk of explo-
sion or fire exists and may
result in serious personal
injury.
Many of the solvents
commonly used to clean
machinery can be toxic
when inhaled or ingest-
ed. Always work in well-
ventilated areas far from
potential ignition sources
when dealing with sol-
vents. Use care when dis-
posing of waste rags and
towels to be sure they do
not create fire or environ-
mental hazards.
-14-
flammable.
Site Considerations
1. Floor Load: Your Model G1023 Series rep-
resents a large weight load in a small foot-
print. Most commercial floors are suitable for
the saw. Some residential floors may require
additional bracing to support both machine
and operator.
2. Working Clearances: Consider existing and
anticipated needs, size of material to be pro-
cessed through each machine, and space
for auxiliary stands, work tables or other
machinery when establishing a location for
your table saw.
3. Lighting and Outlets: Lighting should be
bright enough to eliminate shadows and pre-
vent eye strain. Electrical circuits should be
dedicated or large enough to handle amper-
age requirements. Outlets should be located
near each machine so power or extension
cords are clear of high-traffic areas. Observe
local electrical codes for proper installation
of new lighting, outlets, or circuits.
Make your shop "child
safe." Ensure that your
workplace is inaccessible
to youngsters by closing
and locking all entrances
when you are away. Never
allow visitors in your shop
when assembling, adjust-
ing or operating equip-
ment.
G1023S/G1023S110 Heavy-Duty 10'' Table Saw