Connecting The Monitor; Connecting The Playback Components; Dvd Player - Denon AVR-1908 Owner's Manual

ENGLISH
G)
~
;;.
lQ
C/l
I
g
I
I ~
~
I ..,
I
~
I
a-
I ..
I
~
- ' -
- - - - - V I D E D - - - - -
III
J
HDMI
OUT
DVD player
- - A U D I O - -
AUDIO COMIAI.
OUT OUT
L R
~~ ~
Connecting the Playback Components
Carefully check the left
(l)
and right (R) channels and the inputs and outputs, and be sure to interconnect
correctly.
• Connect the cables to be used .
• With HDMI connections, the video and audio signals can be transferred with a single cable.
• Connect an HDP (High-Definition Player) in the same way.
• When using an optical cable for the digital audio connection, make the settings at menu "Input Setup"
- "Assign" - "Digitalin" ((W'page 33).
Connecting the Monitor
• Connect the cables to be used (Gf'page 8 "Video Conversion Function")'
• With HDMI connections, the video and audio signals can be transferred with a single cable.
• To output the audio signals to the monitor with HDMI connections, set menu "Manual Setup" - "HDMI
Setup" to "TV" (Gf'page 25).
-N·n-
• The component video connectors may be indicated differently on your monitor. For details, see the
monitor's operating instructions .
• No audio signals are output from the HDMI monitor output connector. To play the sound by monitor, make
analog or digital audio output connections to monitor's audio input connectors.
• The audio signals output from the HDMI connectors are only the HDMI input signals.
Video-converted HDMI signals are not included in the audio signals.
12