Restoring All The Settings To As They Were At The Time Of Purchase (Resetting The Microprocessor) - Denon AVR-4810CI Owner's Manual

Restoring All the Settings to as They were at the
Time of Purchase (Resetting the Microprocessor)
Perform this procedure if the display is abnormal or if operations cannot be performed.
When the microprocessor is reset, all the settings are reset to their default values.
<STANDARD>
<POWER>
1
Turn off the power using <POWER>
2
<POWER>
Press while simultaneously pressing
SIMULATION> .
3
Once the display starts flashing at intervals of about 1 second, release the two
buttons.
If in step 3 the display does not flash at intervals of about 1 second, start over from step 1.

<DSP SIMULATION>
.
<STANDARD>
and
<DSP