Upgrading Your Software Product
Yo
u can upgrade your NetDefend fire
After purchasing the Power Pack, you will receive a new Product Key that enables
you to use the Power Pack on the same NetDefend firewall you have today. There
is no need to replace your hardware. You can also purchase node upgrades, as
needed.
Note: To purchase the Power Pack or node upgrades, contact your NetDefend
firewall provider.
To upgrade your product, you must install the new Product Key.
To install a Product Key
1. Click Setup in the main menu, and click the Firmware tab.
The Firmware page appears.
Click Upgrade Product.
2.
Chapter 14: Maintenance
wall by adding the DFL-CP310 Power Pack.
Upgrading Your Software Product
379