D-Link NetDefend DFL-CP310 User Manual page 187

In this field... Do this...
Require WPA2 Specify whether you want to require wireless stations to connect using
(802.11i) WPA2, by selecting one of the following:
•
•
W EP Keys If you selected WEP e
The wireless stations must be configured with the same key, as w
Key 1 , 2, 3, 4 radio Click the radio button nex
bu tton tr
The selected key must be entered in the
devices, but the key need not be selected as the transmit key on the
stations.
Note: You can use all four keys to receive dat
K ey 1, 2, 3, 4 Select the WEP key length from the drop-down list
lengt h
The possible key lengths are:
•
•
•
Note: Some wireless card vendors call these lengths 40/104/128,
respectively.
Note: WEP is generally considered to be insecure, regardless of the
selected key length.
Chapter 7: Configuring a Wireless Network
Enable. Only wireless stations using WPA2 can access the
WLAN network.
Disable. Wireless stations using either WP
the WLAN network. This is the default.
ncryption, you must configure at least one WEP key.
ansmission.
64 Bits. The key length is 1
128 Bits. The ke
y length is 26 characters.
152 Bits. The key length is 32 characters.
A or WPA2 can access
t to the WEP key that this gateway should use for
same key slot (1-4) on the station
a.
0 characters.
Manually Configuring a WLAN
ell.
.
171