D-Link NetDefend DFL-CP310 User Manual page 320

Setting Up Your NetDefend firewall as a VPN Server
To set up your NetDefend firewall as a VPN Server
1. Configure the VPN Server in one or more of the following ways:
• To accept remote access connections from the Internet.
See Configuring the Rem
•
To accept connection
See Configuring the Internal VPN Serv
2. If you configured the internal VPN Server,
internal network computers.
See Installing SecuRemote on
3. Set up remote VPN access for users.
See Setting Up Remote VPN Access for Users on page 367.
Note: Disabling the VPN Server for a specific ty
from internal networks) will caus
disconnect.
304
ote Access VPN Server on page 305.
s from your internal networks.
page 307.
e all existing VPN tunnels of that type to
er on page 306.
install SecuRemote on the desired
pe of connection (from the Internet or
D-Link NetDefend firewall User Guide