About This Guide; Unpacking The Product; Product Overview - D-Link DFL-210 Quick Installation Manual

About This Guide

This guide contains step-by-step instructions
for setting up the D-Link DFL-210/DFL-260
Firewall. Please note that the model you have
purchased may appear slightly different from
those shown in the illustrations.

Unpacking the Product

Open the shipping carton and carefully unpack
its contents. Please consult the packing list
located in following information to make sure all
items are present and undamaged. If any item
is missing or damaged, please contact your
local D-Link reseller for a replacement.
- One (1) DFL-210 or DFL-260 NetDefend IPS
or Firewall Appliance
- One (1) 5V , 3A DC Power Adapter
- One (1) Console Cable (RS-232 Cable)
- One (1) Ethernet (CAT5 UTP/Straight
Through) Cable
- One (1) Ethernet (CAT5 UTP/ Crossover)
Cable
- One (1) Master CD (CD-ROM containing
product documentation in PDF format)
- One (1) 12-Months IPS Subscription
Package for DFL-260 only
- One (1) 12-Months Anti-Virus Subscription
Package for DFL-260 only

Product Overview

Front Panel - DFL-210/DFL-260
A B
Figure 1. DFL-210/DFL-260 Front Panel
Item Feature Description
A Power LED Power indication of the DFL-210/
DFL-260.
B Status LED System status indication of the
DFL-210/DFL-260.
C WAN LED WAN port status indication of the
DFL-210/DFL-260.
D DMZ LED DMZ port status indication of the
DFL-210/DFL-260.
E LAN LED LAN port status indication of the
DFL-210/DFL-260.
Table 1. DFL-210/DFL-260 Front Panel Descriptions
2  D-Link NetDefend Firewall 2  D-Link NetDefend Firewall
Device Status LEDs and Ethernet Port LEDs
The device LEDs show information about current
device status. When the device is powered
up, the POWER LED changes from off to solid
green and the SYSTEM LED changes from off
to solid green. Startup takes approximately one
minute to complete. The Ethernet LEDs show
the status of each Ethernet port. Table 2 lists
the name, color, status, and description of each
device LED.
Note: If you would like to turn the device off and
on again, we recommend waiting a few seconds
between shutting it down and powering it back on.
E
C D
Name Status - Description
Light Off - Device is powered off.
Power
Solid Green - Device is powered on.
System Light Off - Device is powered off or is
starting up.
Solid Green - System is normal
operation.
Blinking Green - System is defective,
like firmware upgrade failure.
Light Off - No Link.
WAN
Solid Green - Link present.
Blinking Green - Port is sending or
receiving data.
Light Off - Port is operating at 10Mbps.
DMZ
Solid Green - Port is operating at
100Mbps
Blinking Green - Port is sending or
receiving data.
Light Off - No Link.
LAN 1-4
Solid Green - Link Present and
operating at 100Mbps
Blinking Green - Port is sending or
receiving data.
Table 2. Device Status LED Descriptions