D-Link NetDefend DFL-CP310 User Manual page 168

Overview
bandwidth, and the FTP connection will receive 25% (10/40) of the leftover
bandwidth. If the Web connection closes, the FTP connection will receive 100% of
the bandwidth.
Each c lass has a bandwidth lim
connections belonging to that class may use together. Once a class has reached its
bandwidth limit o , c nnections belonging to that class will not be allocated f
bandwidth, even if there is unused bandwidth
by Peer-To-Peer fi
512 kilobit per sec
whether connec tio s belonging to the class should be given prece
connections bel onging to other classes.
Your NetDefen d firewall offers different degrees of traffic shaping, dependin
its model:
• Simplified T af
r fic Shaper. Includes a fixed set of four predefined classes.
You can assign network traffic to each class, but you cannot modify the
classes, dele e them, or create new cla t
• Advanced Tr ic
aff Shaper. Includes a set of four predefined classes, bu
enables you to m
You can define up to eight classes, including weight, bandwidth limits, and
DiffServ (D fferentiated Services) Packet Marking param i
marks packets as belonging to a certain Quality of Service class. These
packets are t hen granted priority on the public network according to their
class. Availa ble in NetDefend with Power Pack.
Note: Yo
u can prioritize wireless traffic from WMM-compliant multimedia
applicat ions, by enabling Wireless Multimedia (WMM
Manually Configuring a WLAN on page 165.
152
it, which is the maximum amount of bandwidth that
le-sharing applications may be limited to a speci
ond. Each class also
n
odify the classe s, delete them, and create new classes.
available. For example, traffic used
has a "Delay Sensitivity" value, indicating
sses.
) for the WLAN network. See
D-Link NetDefend firewall User Guide
urther
fic rate, such as
dence over
g on
t
eters. DiffServ