System Status; Upgrading The Dfl-500 Firmware - D-Link DFL-500 User Manual

·
If the DFL-500 is running in Transparent Mode, connect to the management interface
·
Start Internet Explorer and browse to the address https://address where address is the IP address of
the interface to which you are connecting.
The DFL-500 login page appears.
DFL-500 login page
·
Type an administrator name and password and select Login.

System status

If you log into the web-based manager using the admin administrator account you can go to System > Status
to make any of the following changes to the DFL-500 system settings.
·

Upgrading the DFL-500 firmware

·
Manual antivirus database updates
· Manual attack database updates
·
Backing up system settings
·
Restoring system settings
·
Restoring system settings to factory defaults
·
Restarting the DFL-500
·
Shutting down the DFL-500
If you log onto the web-based manager with any other administrator account you can go to System > Status
to view the system settings including:
·
Displaying the DFL-500 serial number
All administrative users can also go to System > Status > Monitor and view DFL-500 system status.
·
System status monitor
Upgrading the DFL-500 firmware
D-Link releases new versions of the DFL-500 firmware periodically. You can download the upgrade from our
Web site (http://www.Dlink.com). You can save this file on your management computer and then use one of
the following procedures to upgrade the firmware on your DFL-500:
DFL-500 User Manual
108