Other Problems
I have forgotten my password. What should I do?
Reset your NetDefend firewall to factory defaults using the Reset button as detailed
in
R esetting the NetDefend firewall to Defaults
T
Why are the date and time displayed incorrectly?
You can adjust the time on the Setup page's Tools tab. For information, see
the Time on the Appliance
I cannot use a certain network application. What should I do?
Look at the Event Log page. If it lists blocked attacks, do the following:
• Set the NetDefend firewall's firewall level to Low and try again.
• If the application still does not work, set the computer on which you want
to use the application to be the exposed host.
For instructions, see
When you have finished using the application, make sure to clear the exposed host
setting, otherwise your security might be compromised.
Chapter 16: Troubleshooting
on page 397.
T
D efining an Exposed Host
T
on page 418.
T
on page 261.
T
Other Problems
S etting
T
443