D-Link NetDefend DFL-CP310 User Manual page 208

Using the Traffic Monitor
The Traffic Monitor page appears.
2. In the Traffic Monitor Report
which you want to view a
The list in ludes all cu c
network is enabled, it will appear in the list.
If Traffic Shaper is enabled, the list also includes the defined QoS classes.
ose All QoS Classes to display a report including all QoS classes. For
Cho
inf ormation on enabling Traffic Shaper see Using Internet Setup on page 63.
d report appears in the Traffic Monitor page.
The selecte
3. To refresh all traffic reports, click Refresh.
4. To clear all traffic reports, click Clear.
Note: T
he firewall blocks broadcast packets used during the normal operation
your network. This may lead to a certain amount of traffic of the type "Traffic
blocke d by firewall" that appears under normal circumstances and usually do
indica te an attack.
192
drop-down list, select the network interface for
report.
rrently enabled networks. For example, if the DMZ
of
es not
D-Link NetDefend firewall User Guide