D-Link NetDefend DFL-CP310 User Manual page 316

Overview
To create a Site-to-Site VPN with
1. On the first VPN site's NetD
a. Define the second VPN site as a Site-to-Site VPN Gateway, or create
a PPPoE tunnel to the second VPN site, using the procedure Adding
and Editing VPN Sites on page 308.
b. Enable the Remote Access VPN Server using the proce
Up Your NetDefend firewall as a Remote Access V
page 303.
2. On the second VPN site's NetDefend firewall, o the f
a. Define the first VPN site as a S
PPPoE t unnel to the first VPN site, using the procedure Adding and
Editing VPN Sites on
b. Then enable the Remote Access VPN Server using the procedure
Setting Up Your NetDefend firewall as a R
Server on page 303.
300
two VPN sites
efend firewall, do the following:
ite-to-Site VPN Gateway, or create a
page 308.
dure Setting
PN Server on
d ollowing:
emote Access VPN
D-Link NetDefend firewall User Guide