Resetting The Netdefend Firewall To Defaults - D-Link NetDefend DFL-CP310 User Manual

Resetting the NetDefend firewall to Defaults

Resetting the NetDefend firewall to Defaults

You can reset the NetDefend firewall to its default settings. When you reset your
NetDefend firewall, it reverts to the state it was originally in when you purchased
it. You can choose to keep the current firmware
that shipped with the NetDefend firewall.
Warning: This operation erases all your settings
have to set a
connection. F
NetDefend firewall.
Y ou can reset the N
i nterface (software) o
the back of the NetDefend firewall.
T o reset the NetDefend
Setup in the main menu, and click the
1. Click
The Tools page appears.
. Click Facto ry Settings.
2
418
new password and reconfigure yo
or information on performing these tasks, see Setting Up the
etDefend firewall to default
r by manually pressing the Reset button (hardware) located at
firewall to factory def
or to revert to the firmware ve
and password information.
ur NetDefend firewall for
s via the Web manage
aults v ia the Web interface
Tools tab.
D-Link NetDefend firewall User Guide
rsion
You will
Internet
ment