D-Link NetDefend DFL-CP310 User Manual page 131

In the IP Address field, type the IP address of the VLAN network's
5.
gateway.
Note: The VLAN network must not overlap other networks.
6. In the Subnet Mask field, type the VLAN's internal network range.
7. If desired, enable or disable Hide NAT.
See Enabling/Disabling Hide NAT on page 107.
8. If desired, configure a DHCP server.
See Configuring a DHCP Server on page 94.
9. Click Apply.
A warning message appears.
OK
10. Click .
A success message app
Network in the main menu, and click the
11. Click
Ports
The page appears.
12. In the drop-down list ne
VLAN netwo rk's name.
You can assign more than one port to the VLAN.
13. Click Apply.
Chapter 5: Managing Your Network
ears.
xt to the LAN port you want to assign, select the
Configuring Network Settings
default
Ports tab.
115