Modifying Port Assignments - D-Link NetDefend DFL-CP310 User Manual

• Assign To. The port's current assignment. For example, if the
DMZ/WAN2 port is currently used for the DMZ, the drop-down list
displays "DMZ".
• Link Config
Full Duplex
duplex (
Automatic Detection indicates that th
detect the link speed and duple
• Status. The detected link speed and duplex.
No Link indicates that the appliance does not
port.
Disable d indicates that the port is disabled. For example, if the DMZ/WAN2
port is currently assigned to the DMZ, but the DMZ is disabled, the port is
ma rked as such.
e display, click Refresh.
2. To refresh th
Modifyin g P ort Assignments
You can ass ign ports to different networks or purposes. Since modifying port
assig nments oft en requires additional configurations, use the table below to
determine whic h procedure you should use:
Table 19: Modifying Port Assignments
To assign a port
to...
LAN
VLAN or
VLAN Trunk
Chapter 5: Managing Your Network
uration. The configured link speed (10 Mbps or 100 Mbps) and
Half Duplex) configured for the port.
or
See...
The procedure below
Configuring VLANs on page 111
e port is configured to automatically
x.
detect anything connected to the
Managing Ports
147