D-Link NetDefend DFL-CP310 User Manual page 47

Note: Mounting the appliance facing downwards is not recommended, as dust might
accumulate in unused ports.
3. M ark two drill holes on the wall, in accordance with the following sk
4. Drill two 3.5 mm diameter holes, approximately 25 mm deep.
5. Insert two plastic conical anchors into the holes.
Note: The conical anchors you received with your NetDefend firewall are suitable for
concrete walls. If you want to mount the appliance on a plaster wall, you must use
anchors that are suitable for plaster walls.
6. Insert the two screws you received with your NetDefend firewall into the plastic
conical anchors, and turn them until they protrude approximately 5 mm from the
wall.
Chapter 2: Installing and Setting up the NetDefend firewall
Wall Mounting the Appliance
etch:
31