Setting The Time On The Appliance - D-Link NetDefend DFL-CP310 User Manual

In this field...
SNMP Port

Setting the Time on the Appliance

You set the time displayed in the NetDefend Portal during initial appliance setup. If
desired, you can change the date and time using the procedure below.
To set the time
1. Click Setup in the main menu, and click the Tools tab.
The Tools page appears.
2. Click Set Time.
The NetDefend Set Time Wizard opens displaying the Set the NetDefend Time
dialog box.
Chapter 14: Maintenance
Do this...
Type the port to use for SNMP.
The default port is 161.

Setting the Time on the Appliance

397