Setting Up Your Netdefend Firewall As A Vpn Server; Setting Up Your Net Defend Firewall As A Vpn Server - D-Link NetDefend DFL-CP310 User Manual

Using the internal VPN Server, along with a strict security policy for non-VPN
users, can enhance security both for wired networks and for wireless networks,
which are particularly vulnerable to security breaches.
The internal VPN Server can be used in the NetDefend firewall wireless appliance,
regardles s of the wireless security settings. It also can be used in wired applianc
both for wired stations and for
Note: You can enable wireless connections to a wired NetDe
connecting a wireless access point in bridge mode to one of
interfaces. Do not connect computers to the
point, since allowing direct access from the wireless network may pose a significant
security risk.
For information on setting up your NetDefend firewall as an internal VPN Server,
see Setting Up Your NetDefend firewall as a VPN Server on page 3

Setting Up Your NetDefend firewall as a VPN Server

You c an make your network available to authorized users connecting from the
Internet or from your internal networks
VP N Server. Users can connect to the VPN Server via Check Point SecuRemo
via a NetDefend firewall in Remote Access VPN mode.
En abling the VPN Server for users connecting from your internal net
layer of security to such connections. For example, while you could create a
fir ewall rule allowing a specific user on the DMZ or WLAN to access the LA
ena l b ing VPN access for the user means that such connections can be encryp
and a uthenticated. For more info
Chapter 12: Working With VPNs
Setting Up Your NetDefend firewall as a VPN Server
wireless stations.
same interface as a wireless access
, by setting up your NetDefend firewall as a
rmation, see Internal VPN Server on page 302.
fend firewall, by
the appliance's internal
03.
works adds a
N,
ted
es,
te or
303