Preparing the Wireless Stations
Preparing the Wireless Stations
After you have configured a WLAN, the wireless stations must be prepared
co
nnection to the WLAN.
To
prepare the wireless stations
1.
If you sele
cted the WEP security mode, give the WEP key to the wireless
stations' administrators.
2.
If you selected the WPA-PSK security mode, give the passphrase to the wireless
stations' administrator.
3.
The wireless
stations' administrators should configure the wireless stations and
connect them to the WLAN.
Refer to the wireless cards' documentation for details.
Note: Some wireless cards have "Infrastructure" and "Ad-ho
are also called "Access Point" and "Peer to Peer". Choose the "Infrastructu
"Access Point" mode.
You can set the wireless cards to either "Long Preamble" or "Short Preamble".
Note: The wireless cards' region and the NetDefend firewall's region must both
match the region of the world where you are located. If you purchased your
NetDefend firewall in a different region, contact technica
182
c" modes. These modes
re" or
l support.
D-Link NetDefend firewall User Guide
for