Resetting Ports To Defaults - D-Link NetDefend DFL-CP310 User Manual

Managing Ports

Resetting Ports to Defaults

You can reset the Ne
("Automatic De tection") and default assignments (shown in the tabl
Table 20: Default Por
Port
1-4
DMZ / WAN2
WAN
RS232
To reset ports to
1. Click N etwor k in the main menu, and click the Ports tab.
he Ports pa
T ge appears.
2. Click Default
.
A confirmati on message appears.
3. Click OK.
The ports are rese
link configuration.
All currently established connections that are not supported by the def
settings may be broken. For example, if you were using the DMZ/WAN2 port as
WAN2, the port reverts to its DMZ assignment, and the secondary Internet
connection moves to the WAN port.
150
tDefend firewall's ports to their default link configurations
t Assignments
Defaul t Assignment
LAN
DMZ
This port is always assigned to the WAN.
Modem
defaults
t to their default assignments and to "Automatic Detection"
e below).
ault
D-Link NetDefend firewall User Guide