Setting Up A Lan Or Broadband Backup Connection - D-Link NetDefend DFL-CP310 User Manual

Setting Up a LAN or Broadband Backup Connection

Using the NetDefend firewall's WAN Port
To set up a LAN or broadband backup Internet connection
1. Connect a hub or switch to the WAN port on your appliance's rear panel.
2. Conne ct your two modems or routers to the hub/switch.
3. Configure two Internet connections.
For in structions, see Using Internet Setup on page
Important: The two c
be LAN DHCP connections.
Using the NetDefend firewall's DMZ/WAN2 Port
To set up a LAN or broadband backup Internet connection
1. Connect a modem to the DMZ
2. Click Netw ork in the main menu, and click the Ports tab.
The Ports page appears.
the DMZ/WAN2 drop-down list, select WAN2.
3. In
Click Apply.
4.
5. Configure two Internet connections.
For instructions, see Using Internet Setup on page 63.
Chapter 4: Configuring the Internet Connection
onnections can be of different types. However, they cannot both
/WAN2 port on your appliance's rear panel.
Configuring a Backup Internet Connection
63.
91