Site-To-Site Vpns - D-Link NetDefend DFL-CP310 User Manual

Overview
Check Point SecuRemote VPN Client, provided for free with your
NetDefend firewall.
• Internal VPN S
networks, allowing you to secure your wired or wireless network with
str ong encryp on and authentication. ti
• Site-to-Site
VP
Gateway in a permanent, bi-directional relationship.
• Remote Access VPN Client. Can connect to a Remote Access VPN Server,
but other VPN sites cannot initiate a connection to the Remote Access
VPN Client. D f
alternati ve to using SecuRemote software.
Both NetDefend firewalls provide full VPN functionality. They can act as a
Remote Access VPN Client, a Remote Access VPN Server for multiple users, or a
Site-to-Site VPN
A virtual private
Server or gate wa y. The type of VPN sites you include in a VPN depends on th
type of VPN you want to
Note: A
IP add ress. If you need a Remote Access VPN Server or gateway with a
IP add ress, you must use SofaWare Security Management Portal (SMP)
manag ement.
A Secu Remote or NetDefend Remote Access VPN C
address, regardless of whether it is locally or remotely managed.
Note: This chapter explains how to define a VPN locally. However, if your appliance
is cent rally managed by a Service Center, then the Service Center can
automaticall
Site-to-Site VP
A Site-to-Site VPN consists of two or more Site-to-Site VPN Gateways that can
communicate with each other in a bi-directional relationship. The connected
298
erver. Secu
Remote can also be used from your internal
N Gateway. Can connect with another Site-to-Site VPN
e ining a Remote Access VPN Client is a hardware
Gateway.
network (VPN) must include at least one Remote Access V
create, Site-to-Site or Remote Access.
locally managed Remote Access VPN Server or gateway must ha
y deploy VPN configuration for your appliance.
Ns
ve a static
dynamic
lient can have a dynamic IP
D-Link NetDefend firewall User Guide
PN
e