Restoring System Settings To Factory Defaults; Restarting The Dfl-500; Shutting Down The Dfl-500; System Status Monitor - D-Link DFL-500 User Manual

Restoring system settings to factory defaults

Use the following procedure to restore system settings to the values set at the factory. This procedure does
not change the DFL-500 firmware version or the Antivirus database.
This procedure deletes all of the changes that you have made to the DFL-500 configuration and reverts the system
to its original configuration including resetting interface addresses.
·
Go to System > Status .
·
Select Restore Factory Defaults.
·
Select OK to confirm.
The DFL-500 restarts with the configuration it had when it was first powered on.
·
Reconnect to the web-based manager and review the system configuration to confirm that it has been
reset to the default settings.
You can restore your system settings by uploading a previously downloaded system settings text file to
the DFL-500.

Restarting the DFL-500

Use the following procedure to restart the DFL-500 using the web-based manager:
·
Go to System > Status .
·
Select Restart.
The DFL-500 restarts.

Shutting down the DFL-500

Use the following procedure to shutdown the DFL-500 using the web-based manager:
·
Go to System > Status .
·
Select Shutdown.
The DFL-500 shuts down and all traffic flow stops.
The DFL-500 can only be restarted after shutdown by turning the power off and on.

System status monitor

You can use the system status monitor to view system activity including the number of active connections to
the DFL-500 and information about the connections. The connections list is divided into Route traffic
connections and NAT traffic connections.
The system status monitor also displays system statistics such as CPU and memory usage.
To view system status:
·
Go to System > Status > Monitor .
The system status monitor display appears.
·
Select Refresh to update the information displayed.
DFL-500 User Manual
113