Restoring System Settings; Restoring System Settings To Factory Defaults - D-Link DFL-1000 User Manual

Hide thumbs Also See for DFL-1000:
Table of Contents

Advertisement

Backing up system settings
Use the following procedures to backup and restore system settings.
These procedures does not back-up and restore the Web content filtering lists. To back-up these lists see
Downloading the banned word list
You can back-up system settings by downloading them to a text file on the management computer.
Go to System > Status .
Click System Settings Download.
Click Download System Settings.
Specify a name and location for the file.
The system settings file is downloaded to the management computer.
Click Return to return to the Status tab.

Restoring system settings

This procedure does not restore the Web content filtering lists. To restore these lists see
block list using a text editor
You can restore system settings by uploading to the DFL-1000 a previously downloaded system settings
text file.
Go to System > Status .
Click System Settings Upload.
Enter the path and filename of the system settings file, or click Browse and locate the file.
Click OK to upload the system settings file to the DFL-1000.
The DFL-1000 uploads the file and restarts, loading the new system settings.
Reconnect to the web-based manager and review your configuration to confirm that the uploaded
system settings have taken effect.

Restoring system settings to factory defaults

Use the following procedure to restore system settings to the values set at the factory. This procedure
does not change the version of the Firmware or the Antivirus database.
This procedure deletes all of the changes that you have made to the DFL-1000 and reverts the system to its
original configuration including resetting interface addresses.
Go to System > Status .
Click System Settings Reset to Default.
Click OK to confirm.
The DFL-1000 reverts to the factory configuration file and restarts.
Re-connect to the web-based manager and review the system configuration to confirm that it has
been reset to the default settings.
You can restore your system settings by uploading a previously downloaded system settings text file
to the DFL-1000.
DFL-1000 User's Manual
and
Downloading the URL block
and
Creating the banned word list using a text
list.
Creating the URL
editor.
93

Advertisement

Table of Contents
loading

Table of Contents