Omron WS02-SIMC1-E - V1.9 REV 02-2009 Operation Manual page 93

Creating a New PLC
PLC data folder
The folder for the file memory
Log folder
Contain data files peculiar to each PLC used by the CX-Simulator. The fol-
lowing files are contained as data files.
File Type
PLC Model Setting File
Break Condition Setting File bsf
Command Log Setting File
Automatic Setting File
Debugger Setting File
I/O Memory File
Save-all File
Debugger Setting File
I/O Memory File
Note A total size of the I/O Memory Files is about 10 MB.
The folder for the file memory corresponds to CS/CJ/CP-series CPU Unit file
memory function, which is fixedly allocated for each file system.
Name
PLC file memory CARD
(Memory card)
EM file memory EM
The file created as the file memory is compatible with the one for
CS/CJ/CP-series CPU Unit. The operation to the folder for the file memory can
be performed in the same way as the file memory for CS/CJ/CP-series CPU
Unit.
Note 1. If the hard disk capacity of the computer is smaller than that of the file
memory, file write may fail.
2. Refer to Section 5 File Memory Functions of CS/CJ Series Programming
Manual for the details on the file memory functions.
The test data for the CX-Simulator is stored. The following data files for each
use are available.
File type
Command Log File
Data Trace File
Data Replay File
Note Refer to 8-3 Generating Virtual External Inputs for the data file in the log folder.
Extension
ini PLC model and registered unit setting file
I/O break condition setting data file
csf Command log setting data file
File created when exiting the system
dbg Debugger automatic setting file
(AUTOEXEC.DBG)
dat Automatic setting file for I/O memory con-
sisting of multiple files (Memoryn.dat: the
underlined part is a serial number)
File created on the [Save all] of the [File]
menu in the [Debug Console] window.
dbg Debugger setting file
dat I/O memory save file
Root Folder Name
No limited capacity (following the capacity
of the computer hard disk)
Capacity limit following the PLC Setting
Extension
flg The data file storing CX-Programmer's
operation log
cdt The compatible data file with the
CX-Programmer's data trace file
csv CSV-format text file
Section 3-5
Contents
Note
Content
57