Omron WS02-SIMC1-E - V1.9 REV 02-2009 Operation Manual page 263

I/O Memory Allocation
Address
Words Bits
A408 A40800 Basic I/O Unit
to Error, Slot
A40807 Number
A40808 Basic I/O Unit
to Error, Rack
A40815 Number
A409 A40900 Expansion I/O
to Rack Number
A40907 Duplication
Flags
A410 A41000 CS/CJ-series
to CPU Bus Unit
A41015 Number Du-
plication
Flags
A411 to A41100 Special I/O
A416 to Unit Number
A41615 Duplication
Flags
Name
When an error has occurred in a
Basic I/O Unit (including C200H
Group-2 High-density I/O Units
and C200H Interrupt Input
Units), A40212 will be turned
ON and the slot number where
the error occurred will be written
here in binary.
When an error has occurred in a
Basic I/O Unit (including C200H
Group-2 High-density I/O Units
and C200H Interrupt Input
Units), A40212 will be turned
ON and the Rack number where
the error occurred will be written
here in binary.
The corresponding flag will be
turned ON when an Expansion
I/O Rack's starting word address
was set from a Programming
Device and two Racks have
overlapping word allocations or
a Rack's starting address ex-
ceeds CIO 0901. Bits 00 to 07
correspond to Racks 0 to 7.
The Duplication Error Flag
(A40113) and the corresponding
flag in A410 will be turned ON
when a CS/CJ-series CPU Bus
Unit's unit number has been
duplicated. Bits 00 to 15 corre-
spond to unit numbers 0 to F.
CPU Unit operation will stop and
the ERR/ALM indicator on the
front of the CPU Unit will light.
The Duplication Error Flag
(A40113) and the corresponding
flag in A411 through A416 will
be turned ON when a Special
I/O Unit's unit number has been
duplicated.
CS/CJ-series PLC
Function
CX-Simulator
Settings Function
00 to 09 Not used.
hexadecimal
(Slots 0 to 9)
00 to 07 Not used.
hexadecimal
(Racks 0 to 7)
1: Error Not used.
0: No error
1: Duplication Not used.
detected
0: No duplica-
tion
1: Duplication Not used.
detected
0: No duplica-
tion
Section 9-3
Settings
227