Omron WS02-SIMC1-E - V1.9 REV 02-2009 Operation Manual page 170

Examples of Serial Communications Debugging
134
7. Copy the data file created in procedure 6 in the input file (COM port name
In.txt).
8. Changing in the file update time causes automatic reception of data from
the input file.
9. Execute Step Run, etc. to confirm the process of data received.
10. Repeat the debugging procedures 7 to 9 depending on the contents of
serial input data.
Note Escape sequences contained in the send/receive data are handled as '\n' (n is
a lower-case alphanumeric character.) in the file. For example, the delimiter
for Host Link is '\r'.
Section 5-5