Omron WS02-SIMC1-E - V1.9 REV 02-2009 Operation Manual page 127

Debug Console Window
[Command log] | [Stop]
[Command log] | [Configuration]
FINS Address Filter
Registration List
FINS Address Filter
Filter Check
FINS Command Filter
Registration List
FINS Command Filter
Filter Check
Exit the Command Log. Can not be selected if the Command Log has not been
started.
Set the Command log. The Command log saves the CX-Programmer com-
mands with FINS commands.
Log file name
•
Browse
•
Read
•
Save
•
Clear All
•
Set All
•
OK
•
Cancel
•
Input the file name for saving the Command Log. If the
existing file is specified, the log data will be appended
to the bottom of the file.
The Log file can be selected by browsing.
Read the Command Log settings from the file.
Save the Command Log settings to the file.
Clear the filter check for all of the registered items of
the FINS address filter and the FINS command filter.
Select the filter check for all of the registered items of
the FINS address filter and the FINS command filter.
Save the present settings and exit the window.
Discard the present settings and exit the window.
Section 3-9
91