Omron WS02-SIMC1-E - V1.9 REV 02-2009 Operation Manual page 196

Debugging Using Virtual External Inputs
Generating Virtual External Inputs
Command log
Data trace
Data Replay File
I/O Condition Setting
Program area for debugging
(UM2)
Running by Virtual External Inputs
Data Replay Tool
I/O Condition Tool
Program area for debug-
ging (UM2)
Checking the result
Time chart monitor/Data
trace
Data Replay File/Table and
Graph display
160
Setting data
Static setting with a data file Perform necessary operation from the
Static setting with a data file Read the contents of data trace from the
Static setting with a data file Register necessary data to a CSV-format
Dynamic setting with I/O
condition expressions
Dynamic setting with ladder
programs
Read data in sequence from the data file (command log, data trace, or
Data Replay file) and set them to the Ladder Engine.
Monitor the I/O memory areas and set data when the conditions hold.
Download the ladder program for debugging to the program area for de-
bugging (UM2) and execute it at the same time as the ladder program for
application.
Check the result caused by virtual external inputs using the
CX-Programmer's time chart monitoring and the display function of data
trace.
Output the result as a file (CSV format) while Data Replay and read it to a
commercial spreadsheet software to check it as tables and graphs.
Contents
CX-Programmer and save its history to a file.
actual CS/CJ-series CPU Unit by the
CX-Programmer and save them to a file.
data file.
Set I/O conditions for inputting in logic ex-
pressions combining I/O memory conditions.
Create a ladder program that inputs to a
ladder program for applications.
Contents
Contents
Section 8-2